Tile Floor Cleaning: 7 Good Tips

Keeping a home floor in good condition for longer requires certain cleaning methods that depend on the type of floor. Tile flooring is not the same thing as parquet, marble or a porous stone surface. For this reason, we now want to tell you how best to clean your home’s tile floor.

Such floor space is common in kitchens, bathrooms and terraces. Keeping it clean requires proper cleaning. Tiles often collect a lot of dirt not only on the surfaces but also on the joints.

Read our instructions below to help you clean your tile floor in the kitchen and bathroom easily, efficiently and quickly.

Tile floor washing

Many believe that cleaning a tile floor is very successful with just a wet cloth. In reality, this is not the case. A good result also requires the use of natural detergents or chemicals.

Remove grease stains

The best way to get rid of grease stains on tiles is to use a mixture of ammonia and water. This mixture is very effective, but it smells quite strong. Avoid breathing it for too long. And while this mixture is suitable for cleaning surfaces, avoid contact with the skin as it is very harmful to the skin.

Clean the tile surfaces with a sponge and gloves with this solution, and then dry them with a clean, dry cloth.

Remove limescale deposits

Limescale can be difficult to remove as it accumulates over time on surfaces as a result of poor cleaning. It is usually seen in all areas that have been in contact with highly calcium-containing water.

To remove limescale deposits, mix just over a couple of decades of vinegar in a liter of water. With this mixture you remove limescale stains from tiles in the bathroom, kitchen or terrace.

Polish the tiles

In addition to removing dirt, the care of the tiles also requires that they be considered to look flawless anyway.

To polish the tiles, swim a piece of newspaper in a mixture of ammonia and water and rub the floor with this mixture. The structure of the newspaper promotes the cleaning of dirt. Then rinse the tiles with water for best results.

Cleaning dirt from seams

Tile seams always get dirty. Their surface is porous, which is why dust, moisture, grease and other dirt easily accumulate in them and their cracks.

If you want the seams of your tiles to be white again, prepare a washing solution from apple cider vinegar.

1. Mix about desi water with the same amount of apple cider vinegar.
2. Rub the seams with a brush and leave on for 10 minutes.
3. Then rinse with boiling water and allow to dry naturally.

Washing the tile floor with baking soda

Baking soda is used in many ways to clean a home. In this case, it is ideally suited for heavier stains on tile surfaces. It can be used to remove strong odors and dirt.

• Sprinkle a little baking soda on the tile surfaces and hot water on top. Clean the tiles and leave on for 10 minutes.
• After 10 minutes, rinse with hot water to complete the cleaning job.

Tile floor cleaning with bleach

The bleach has disinfectant properties. Its active ingredient easily removes bacteria and other microorganisms from floors.

Bleach also helps to whiten the seams. Be careful not to use too much bleach when cleaning floors, as this may discolour them.

As with ammonia, it is important to avoid the substance coming into contact with the skin and inhaling its vapors for too long.

With these tips, you can clean your tile floor efficiently. Don’t hesitate to use them next time it’s cleaning time!